#
# Telephony device configuration
#

menu "Zaptel telephony devices support"
	depends on PHONE

config ZAPTEL
        tristate "Zaptel telephony hardware support"
        depends on PHONE
        ---help---
          Say Y here if you want to use Zaptel support.

config ZAPTEL_ZAPTEL
	tristate "Zaptel device support"
	depends on ZAPTEL
	---help---
          Say Y here to configure in Zaptel services support for various
          cards manufactured by Digium, Junghanns and others. This will 
          create the module zaptel.ko, which is needed by all drivers

config ZAPTEL_ZTDUMMY
	tristate "Dummy Zaptel device support"
	depends on ZAPTEL
	---help---
	  Say M if you don't have any zaptel hardware but still use
          software that needs the zaptel interface for timing.
	  You will get a module called ztdummy.ko.

config DIGIUM_TORISA
	tristate "Digium Tormenta ISA support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Tormenta ISA card manufactured by Digium
	  You will get a module called torisa.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on this cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_X100P
	tristate "Digium Wildcard T100P T1/PRI Interface support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Wildcard T100P T1/PRI card manufactured
          by Digium.  You will get a module called wct1xxp.ko

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_TDM400P
	tristate "Digium TDM400P support"
	depends on ZAPTEL
	---help---
	  Say M if you have a TDM400P card manufactured by Digium
	  You will get a module called wfctdm.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_TDM2400P
	tristate "Digium TDM2400P support"
	depends on ZAPTEL
	---help---
	  Say M if you have a TDM2400P card manufactured by Digium
	  You will get a module called wctdm24xxp.ko

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_T1XXP
	tristate "Digium T100P support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Wildcard T100P T1/PRI card manufactured 
          by Digium. You will get a module called wct1xxp.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_TE4XXP
	tristate "Digium TE410P/TE405P support"
	depends on ZAPTEL
	---help---
	  Say M if you have a TE410P/TE405P Quad-T1/E1 PCI card manufactured 
          by Digium. You will get a module called wct4xxp.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_TE11XP
	tristate "Digium TE110P support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Wildcard TE110P T1/PRI card manufactured 
          by Digium. You will get a module called wcte11xp.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_TE12XP
	tristate "Digium TE12xP support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Wildcard TE12xP T1/PRI card manufactured 
          by Digium. You will get a module called wcte12xp.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config DIGIUM_TC4XXB
	tristate "Digium TC400B support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Wildcard TC400B G.729A transcoder card manufactured 
          by Digium. You will get a module called wcte12xp.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Digium's web site at:
	  <http://www.digium.com/>.

config JUNGHANNS_QOZAP
	tristate "Junghanns QuadBRI support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Quad/OctoBRI card manufactured 
          by Junghanns. You will get a module called qozap.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

	  For more information on these cards, see Junghanns's web site at:
	  <http://www.junghanns,net/>.

config JUNGHANNS_ZAPHFC
	tristate "HFC-S PCI A based ISDN BRI cards support"
	depends on ZAPTEL
	---help---
	  Say M if you have a HFC-S PCI A based ISDN BRI card
          You will get a module called zaphfc.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

config JUNGHANNS_CWAIN
	tristate "Junghanns.NET E1 card support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Junghanns.NET E1 card
          You will get a module called cwain.ko.

          You should configure the card using the zaptel userspace
          utilities, available from ftp.asterisk.com/pub/zaptel.

config JUNGHANNS_ZTGSM
	tristate "Junghanns.NET GSM card support"
	depends on ZAPTEL
	---help---
	  Say M if you have a Junghanns.NET GSM card
	  You will get a module called ztgsm.ko.

	  You should configure the card using the zaptel userspace
	  utilities, available from ftp.asterisk.com/pub/zaptel.

endmenu

